EOAT RFQ

Request an EOAT quote

Injection molders in Michigan are eligible for in-house support.
Other industries: this form is for plastic injection molding. If you need a tool for a different industry, email us at Email instead.
End of Arm Tool RFQEmail
Fields marked * are required. Everything else is optional, but the more you fill in, the faster we can quote.
Contact
Enter your company name.
Enter who we should talk to.
Enter a work email so we can send your RFQ number.
Where the tool will ship to and run.
Enter the city and state of the plant.
That looks like a plant outside Michigan. You can still submit, and we'll get back to you about whether we can take it on.
For customer-funded tooling and "Property of" tags.
If you'd like an NDA in place, you can choose that under Files.
Part
Used for future tool support and documentation.
Enter the mold number or part ID.
Enter the resin. It decides nipper size and cup material.
Painted, plated or chromed after molding?
A-surface contact
Mold and ejection
How do parts come off the ejector pins?*
Choose one. It decides whether the tool needs compensation.
Space between the platens with the mold fully open.
s
Who cuts the gate?
Robot
Type*
Choose the robot type.
Entry to mold*
Choose how the robot enters the mold.
Does the robot follow ejection (Y-free)?
Enter a number (0 if none).
Enter a number (0 if none).
I/O type
We assume 24 VDC.
Robot interface
We supply the tool side of the changer with the EOAT, not the robot side, unless you note otherwise.
Pneumatic connections (robot side)
The outside diameter of the air and vacuum tubes on your robot, so our tubing matches.
Tool functions
Part sensing (choose all that apply)
Dual verification is fine: tick both methods.
Tool preferences
EOAT standard
A standard usually covers brands, tubing colors, tags and connector pinout.
What should be stamped or printed on the tool's ID tag.
Job
Sample parts for run-off
shots, with runner
True North cannot guarantee degating functionality without sample parts.
A design approval must be signed prior to kickoff.
Files
What you'll send us
Mold CAD is preferred in the ejected position, with slides back. STEP, Parasolid, IGES or SolidWorks.
No mold data? That's fine. We'll set up a meeting to go over the part geometry with a True North engineer.
Export-controlled data: if your data is ITAR or export-controlled, don't send it through this form. Email us at Email instead.
    Please confirm you're allowed to share these files.

    How we handle your files. We use them only to prepare your quote and, if you order, to design your tool. They're stored in access-controlled storage, and if we don't quote, they're deleted after 30 days.